This can be risky if you accidentally drill into the china, it is likely to break. If you cannot cut the bolt, you may be able to drill it out.
The bolts are brass, which is a relatively soft metal and is not very difficult to cut. You may also be able to access and cut the bolt from between the tank and bowl. Place the blade under the head, inside the tank and cut through the bolt. Wrap the par tyou hold with some duct tape. It will help to bend the blade to give you something to hold on to. One method it to use a hacksaw blade (just the blade alone or possibly small hack saw for tight spaces if there is room). Use caution or you may damage the vitreous china once broken, you may have to replace the entire toilet. If a tank bolt just turns but won't unscrew from the nut, it might be necessary to cut the bolt off to remove it.
#CANNOT REMOVE TOILET TANK BOLTS HOW TO#
How To Remove Stuck Corroded Toilet Tank Bolts If the nut is seized to the bolt you can try penetrating oil like 3-in-1 or WD-40 to loosen it. If the bolt turns when the nut is turned, you may need an assistant to hold a screwdriver in the bolt head while you turn the nut. Reach under the bowl and loosen the nut, you may be able to do it by hand or you may need a pair of pliers or slip joint pliers depending on the type of nut. Place a large towel on the ground beneath the tank to catch any spillage. To replace the bolts or washers, turn off the water supply valve and flush the toilet. Water droplets on the end of the bolt under the bowl is a telltale sign. This typically results in water on the floor beneath the tank.
#CANNOT REMOVE TOILET TANK BOLTS CRACKED#
If the washer is misaligned, has been damaged or has cracked or hardened with age, it may leak water from the tank. Washers or spacers may fit between the tank and the bowl and finally a rubber, plastic or metal washer fits onto the bolt between the bowl and the nut that secures it in place.Ĭaution: Please read our safety information before attempting any testing, maintenance or repairs. Typically rubber washers fit between the bolt head and the inside of the tank. These bolts go through a hole in the bottom of the tank and through matching holes in the bowl. How To Check or Replace the Tank Bolts How to Check the Tank BoltsĪ two piece toilet has a set of bolts that secure the tank to the bowl.
0 kommentar(er)
